Reversible plows

HFAGRO reversible plows for maximum plowing efficiency in your field.

Soil resistance up to 0.1 MPa (1 kgf / cm2), hardness up to 4.0 MPa (40 kgf / cm2)

HFAGRO reversible plows are designed for plowing of grain and industrial crops to a depth of 18 to 35 cm, on soils not clogged with stones, flagstone and other obstacles.

EXCELLENT AND UNIVERSAL PARAMETERS

Tractor power – from 80 to 33 hp
Coverage from 0.84 to 4 meters
Working depth from 18 to 35 cm

PERFECT PROCESSING QUALITY

● HFAGRO reversible plows have a high (800 mm) tine and can be equipped with a solid or strip body blade.
● The dumps have a strip structure, which allows to loosen the soil intensively and without gaps in conditions of high humidity.
● The working bodies are equipped with screw adjusters that allow to adjust the width and angle of the blade in the range from 330 to 500 mm.

CONSTRUCTIVE ADVANTAGES OF HFAGRO PLOWS

PRODUCTIVITY AND MANEUVERABILITY

Due to the verified design, efficient positioning of the support wheel (lateral placement), telescopic hydraulic cylinders provide fast turning on a narrow headland, which significantly saves time.

UNIVERSALITY

The ability to easily change the width of the working body. Simple and easy adjustment, practically no tools required

CONVENIENCE IN TRANSPORTATION

Possibility to transport the plow at high speed without putting stress on the tractor hitch

STRENGTH AND WEAR RESISTANCE

Maximum frame strength is a guarantee of long-term service, and high wear resistance of working bodies made of high-quality steel ensures cost savings and durability of operation.

EFFICIENT AND ECONOMIC WORKING BODIES

RELIABLE DESIGN

The mouldboards are fully attached to the boot of the plow body and are not part of the supporting structure. They only provide land turnover.

MAXIMUM ECONOMY

Mouldboards can be used until almost completely worn out as this does not compromise the strength of the plow body.

EXTENDED SERVICE LIFE

HFAGRO plow bodies have an extended service life. They are suitable for tough, sticky soils and require less tractive effort.

WORKING IN SEVERE CONDITIONS

On strip heaps, the distance between the strips and the rear strip attachment is significantly increased. The mounts are behind the strips, allowing blockage-free plowing on heavy soils.

THOUGHT-OUT AND RELIABLE DESIGN

HFAGRO reversible plows consist of a frame with a body turning mechanism (right and left, each body is made with a strip blade), a rear support wheels mechanism and a drawbar with a tower.

The frame consists of square beams, which are hinged to each other. On both sides, the main frame beam is pivotally connected by a pivot beam to the supporting beam. The main beam is also equipped with a diagonal stop that connects the main beam and the rear swing beam.

On the side that adjoins the tractor, the drawbar is provided with a fastening point (tower), and on the opposite side – with a mechanism with two support wheels.

LARGE SUPPORT WHEEL

The large support wheel reduces the pressure on the soil during plowing and ensures safe transportation.
On plows that are equipped with an additional body, the position of the support wheel makes it possible to plow near the border of the field.

RELIABLE STEERING MECHANISM

Two telescopic hydraulic cylinders provide a quick 180 degree plow rotation.
Due to the lateral arrangement of the support wheel, not only the load on the plow frame is reduced, but also the distance between the tractor wheels and the plow wheel.
This increases the maneuverability of the entire hitch when turning.

ACCURATE AND CONVENIENT ADJUSTMENTS

Fine adjustment of the tilt position of the plow in the furrow is carried out using the adjusting bolts separately for each side.
The design allows you to adjust both the width and the angle of inclination of the blade, and in a wide range (33, 38, 44 and 50 cm for each body).

The working depth of the skimmers is set in steps using a pin on a flat stand.
This allows all skimmers to be in the same position without additional measurements.

High standards of production and quality of materials ensure reliable, trouble-free and long-lasting operation of HFAGRO plows throughout their entire service life.

TECHNICAL CHARACTERISTICS

HF-1114 mHF-1114 mHF-1115 mHF-1115 mHF-1116 mHF-1116 mHF-1118 smHF-1118 sm
Number of bodies, pcs33+144+155+177+1
Working width, m0,84-1,601,12-1,601,32-2,001,65-2,501,65-2,501,98-3,002,31-3,502,64-4,00
Transport width, m1,801,801,751,751,721,721,721,72
Plowing depth, cm18-3018-3018-3518-3518-3518-3518-3518-35
Tine height, mm700700800800800800800800
Distance between racks, mm8608609009001000100010001000
Body capture width, cm28 / 32 / 36 / 4028 / 32 / 36 / 4033 / 38 / 44 / 5033 / 38 / 44 / 5033 / 38 / 44 / 5033 / 38 / 44 / 5033 / 38 / 44 / 5033 / 38 / 44 / 50
Recommended working speed, km/h5-95-98-108-108-108-108-108-10
Maximum transport speed, km/h1515151520202020
Weight, kg740960159018502500275031003450
Tractor power, h.p.82120180230230270300330
Plow with system ON-LAND++

If you need more information – call us +38 050 301-42-80 or write to office@hfagro.com.ua